10-08-2022, 09:12 PM
CPU: Intel® Whiskey Lake U Processor in the FCBGA1528 sockets.
Memory: Two DDR4 2400 MHz SO-DIMM up to 32 GB, support Non-ECC, unbuffered memory.
Integrated Graphics: Intel® Gen 9.5 integrated HD Graphics.
LVDS interface: Onboard 18/24-bit single/dual channel LVDS connector with +3.3V/+5V/+12V supply
Display port interface: Onboard Display port connector. (Only LE-37N7)
HDMI interface: Onboard HDMI connector.
VGA interface: Onboard 11-pins connector.(Only LE-37NT7)
LAN Interface: 1 x Intel® i219-LM Gigabit PHY LAN(Support iAMT 12.0), 1 x Intel® i210-AT Gigabit LAN.
Serial ATA: Support 2 x SATA3.
Audio: Realtek ALC262 High Definition Audio.
Internal I/O: 2 x SATA3, 1 x RS232, 2 x RS232/422/485, 4 x USB2.0, 1 x VGA(Only LE-37NT7), 1 x LVDS, 1 x LCD inverter, 1 x GPIO, 1 x Audio, 1 x PS/2, 1 x SMBus.
Rear I/O: 1 x DisplayPort(Only LE-37N7), 1 x HDMI, 4 x USB3.1 Gen2, 2 x LAN, 1 x RS232.
Extended interface: One PCIE Mini card (Support mSATA), one M.2 (Key E).
GPIO interface: Onboard programmable 8-bit Digital I/O interface.
Power requirement: DC input 9~35V.
Memory: Two DDR4 2400 MHz SO-DIMM up to 32 GB, support Non-ECC, unbuffered memory.
Integrated Graphics: Intel® Gen 9.5 integrated HD Graphics.
LVDS interface: Onboard 18/24-bit single/dual channel LVDS connector with +3.3V/+5V/+12V supply
Display port interface: Onboard Display port connector. (Only LE-37N7)
HDMI interface: Onboard HDMI connector.
VGA interface: Onboard 11-pins connector.(Only LE-37NT7)
LAN Interface: 1 x Intel® i219-LM Gigabit PHY LAN(Support iAMT 12.0), 1 x Intel® i210-AT Gigabit LAN.
Serial ATA: Support 2 x SATA3.
Audio: Realtek ALC262 High Definition Audio.
Internal I/O: 2 x SATA3, 1 x RS232, 2 x RS232/422/485, 4 x USB2.0, 1 x VGA(Only LE-37NT7), 1 x LVDS, 1 x LCD inverter, 1 x GPIO, 1 x Audio, 1 x PS/2, 1 x SMBus.
Rear I/O: 1 x DisplayPort(Only LE-37N7), 1 x HDMI, 4 x USB3.1 Gen2, 2 x LAN, 1 x RS232.
Extended interface: One PCIE Mini card (Support mSATA), one M.2 (Key E).
GPIO interface: Onboard programmable 8-bit Digital I/O interface.
Power requirement: DC input 9~35V.